Basket Strainer Extremely Convenient To Use And Maintain

Basket Strainer is to remove a small amount of solid particles in the liquid filtration equipment, can protect the normal operation of equipment, when the fluid enters a certain specification filter cartridge, the impurities are blocked, and the clean filtrate is discharged by the filter outlet, when the need to clean, as long as the removable cartridge removal, processing after reloading can be, therefore, The use of maintenance is extremely convenient.

Basket Strainer Products use:

The Basket Strainer is suitable for discharging rust residue and foreign body in the piping of steam, air, kerosene, water and so on to protect the valve and equipment;

Basket Strainer Product Features

1, standard stainless steel filter, the number of aperture can be selected: 25 mesh-300 mesh;

2. The optional pressure gauge is connected, and the convex surface is drilled with threaded holes to install the pressure gauge;

3, the flow area is big, therefore the pressure loss is small.

Basket Strainers remove small amounts of solids in liquids, which can protect compressors, pumps, and other equipment and instruments, as well as small devices that improve product purity and purify gas. As a result, Basket Strainers are widely used in petroleum, chemical engineering, chemical fiber, medicine, food and other industries. Basket Strainer has shell, sewage cover, filter, strainer, bolt and so on.

A filter is a small device that removes a small amount of solid particles in a liquid, can protect the normal work of equipment, when the fluid into a certain size filter filter, the impurities are blocked, and clean filtrate is discharged by the filter outlet, when the need to clean,Basket Strainer as long as the removable cartridge removed, processing after reloading can be.

1, filter import and export path:

In principle, the filter's import and export path should not be less than the matching pump inlet path, generally the same caliber as the inlet pipe.

2. Nominal pressure type:

Determine the pressure level of the filter according to the maximum pressure that the filter pipe may appear.

3, the choice of therapsids number:

The selection of hole number of filter mainly considers the impurity size which needs to intercept, according to the process requirement of medium process. Various specifications screen can intercept the size of the diameter of the table to check the "Filter mesh specifications."

4, Filtration equipment quality:

The material of the filter is generally selected with the same material as the connecting process pipe, and the filter for cast iron, carbon steel, low alloy steel or stainless steel can be considered for different service conditions.

5, Filter resistance loss calculation

Water filter, under the general calculation of the nominal flow rate, the pressure loss of 0.52~1.2kpa.