Introduction of Single Bag Filter Structure

The single-bag filter adopts side-in and bottom-out mode, and presses the filtered liquid medium into the filter barrel through the pressure in the pipeline. The liquid medium to be filtered supports the filter bag supported by the filter blue through the stainless steel plate. Filtration, resulting in the ideal liquid-liquid separation to achieve the effect of liquid media is filtered. As the liquid medium into the filter from the top of the bag after the inflow, so that the liquid can be evenly distributed throughout the filter bag filter surface, so that the entire distribution of the fluid layer in the same basic constant, the negative impact of small turbulence, filtration effect. In this case,

Single-bag filter inside the metal mesh supported by the bag, the liquid flow from the entrance, the filter bag after the outflow of impurities were blocked in the bag, the filter bag can be replaced after use. Wanson bag filter is mainly based on deep filtration, surface filtration, adsorption filtration and other three filtering principles, with accurate, efficient and stable characteristics. In this case,

Single-bag filter is a pressure-type filter device, mainly filter cartridge, filter cover and quick-open body, stainless steel filter bag to strengthen the network and other major components, the filtrate from the filter side of the inlet tube into the filter bag , The filter bag itself is installed in the reinforcement basket, the liquid infiltration through the required fineness of the filter bag that can be qualified filtrate, impurity particles are filter bag to intercept. The machine is very convenient to replace the filter bag, filter basically no material consumption.